蓝牙开发

资格测试设施

今天就对您Bluetooth 的产品进行认证

A Bluetooth®合格测试设施（BQTF）被公认Bluetooth SIG 为有能力执行测试案例参考清单（TCRL）中确定的"主机控制器接口（HCI）层的A类"的合格测试案例。

如果您的测试计划由Launch Studio生成，表明所需的测试将在HCI层的A类或以下进行，您需要提供来自Bluetooth 合格测试机构的测试服务结果，除非您的公司是Bluetooth 认可测试机构（BRTF），在这种情况下，您可以提供来自您公司自己Bluetooth 的认可测试机构的测试结果。请注意，"Bluetooth 认可测试机构"不允许作为其他Bluetooth SIG 会员 公司的独立测试机构。

您有责任直接与Bluetooth 合格测试机构签订测试服务合同。

有关Bluetooth 合格测试机构计划的更多详情，包括贵公司如何成为Bluetooth 合格测试机构或Bluetooth 认可测试机构，请点击下面的"了解更多关于申请该计划的信息"按钮。

了解更多关于申请该项目的信息

 

目前Bluetooth 的资格测试设施

目前Bluetooth 公认的测试设施

Authorized Test Scope Supported Testing Capabilities
RF:1 Vol 2 Part A Radio Specification, in the Test Suite RF.TS, which includes receiver and transmitter tests for Bluetooth Basic Rate (BR) and Enhanced Data Rate (EDR), EDR2 and EDR3.
HS:1 Vol. 5, Part A 802.11 Protocol Adaptation Layer (802.11 PAL) in the Test Suite 802.11 PAL.TS
RF-PHY:1 (a) Vol 6 Part A, Physical Layer Specification, in the Test Suite RF-PHY.TS which includes receiver and transmitter tests for LE 1 Mb/s; with
(b) Fixed 37 bytes packet payload length, and
(c) Packet length extensions (packet payload length ranges from 37 bytes to 255 bytes)
RF-PHY:2 Vol 6 Part A, Physical Layer Specification, in the Test Suite RF-PHY.TS which includes receiver and transmitter tests for
(a) 20 dBm Higher Output Power RF-PHY
(b) LE 2Mb/s
(c) Coded PHY (125 kb/s or 500 kb/s)
(d) Stable Modulation Index
(e) All required testing capabilities associated with the RF – PHY:1 test scope option
RF-PHY:3 Vol 6 Part A, Physical Layer Specification, in the Test Suite RF-PHY.TS which includes receiver and transmitter tests for
(a) AoA/AoD (IQ Samples Coherency AoD/AoA Receiver, IQ Sample Dynamic Range AoD/AoA Receiver)
(b) All required testing capabilities associated with the RF – PHY:2 test scope option
BR/EDR Protocols:1 (a) Vol 2 Part B, Baseband (BB) Specification, in the Test Suite BB.TS
(b) Vol 2 Part C, Link Manager Protocol (LMP) Specification, in the Test Suite LMP.TS
(c) Vol 2 Part E Host Controller Interface (HCI) Specification, including the BR/EDR only HCI tests in the Test Suite HCI.TS
LE Protocols:1 (a) Vol 6 Part B Link Layer (LL) Specification, in the Test Suite LL.TS
(b) Vol 2 Part E Host Controller Interface (HCI) Specification, including the LE only and BR/EDR/LE HCI tests in the Test Suite HCI.TS
LE Protocols:2 (a) Vol 6 Part G Isochronous Adaptation Layer (IAL) Specification, in the Test Suite IAL.TS (Isochronous Adaptation Layer)
(b) All required testing capabilities associated with the LE Protocols:1 test scope option
Host Layers Layers above HCI in the Bluetooth SIG adopted Core Specifications
Traditional Profiles and Protocols Bluetooth SIG adopted Profile and Protocol Specifications external to the Core in the Profile TCRL
GATT-Based Profiles & Services Bluetooth SIG adopted Profile and Service Specifications operating over the GATT architecture in the GATT based TCRL
Bluetooth High Speed (HS) Supportive Protocols * IEEE 802.11 PHY in the Core TCRL
* MAC Layers (IEEE 802.11-2007) in the Core TCRL
Mesh Profile & Mesh Models Bluetooth SIG adopted Mesh Profile and Mesh Model Specifications in the MESH-MMDL TCRL

我的蓝色

获得帮助