Interference is one of the biggest challenges for any wireless technology in providing reliable data communication. Since wireless technologies like Bluetooth®, Wi-Fi, and 802.15.4 devices share a transmission medium, it’s possible for a data packet that is being transmitted to be corrupted or lost if it collides with another packet being transmitted at the exact same time and on the same frequency channel.

One of the techniques Bluetooth technology uses to overcome interference and find a clear transmission path that avoids packet collision is the application of a form of frequency-hopping spread spectrum (FHSS) called adaptive frequency hopping (AFH). Bluetooth divides the frequency band into smaller channels (e.g. 40 channels in the case of Bluetooth Low Energy) and rapidly hops between those channels when transmitting packets. To further reduce the chance of interference, Bluetooth adapts its hopping sequence. Channels that are noisy and busy are dynamically tracked and avoided when sending packets.

Recently, Martin Woolley, developer relations manager with the Bluetooth Special Interest Group (SIG), released a paper on Understanding Reliability in Bluetooth Technology. In this deep dive into Bluetooth reliability, Woolley explains how Bluetooth technology uses adaptive frequency hopping to lower the probability of collisions and offset inevitable packet loss.

Below is an excerpt from that section of Woolley’s paper.

Adaptive Frequency Hopping

One of the major challenges in radio communications concerns collisions, which are particularly problematic in busy radio environments. Earlier we explored collisions and explained that a collision occurs when two or more devices transmit data on the same radio channel in overlapping time periods, and that different radio technologies such as Bluetooth® technology and Wi-Fi can interfere with each other if their use of the radio spectrum overlaps.

Bluetooth technology mitigates the risk of collisions through its use of spread spectrum techniques. When two devices are connected, this involves a specific technique known as adaptive frequency hopping.

At each connection event, a pair of connected devices have the opportunity to use their radios to exchange packets at precisely timed intervals. But in addition to this, at the start of each connection event, frequency hopping occurs, with a radio channel being deterministically selected from the set of available channels using a channel selection algorithm. Each device in the connection will then switch to the selected channel and over time and a series of connection events, communication will take place using a frequently changing series of different channels, distributed across the 2.4 GHz band, thereby significantly reducing the probability of collisions occurring.

Of the 40 channels defined for use by Bluetooth Low Energy (LE), 37 of these channels (known as the general purpose channels) are available for use during connected communication.

FEATURED

How Bluetooth® Technology Makes Wireless Communication Reliable

Learn about the challenge of wireless interference and the techniques Bluetooth technology uses to overcome it.

LEARN MORE

Frequency hopping makes a great contribution to reliability in communication between connected devices but Bluetooth goes one step further.

In a given environment, some Bluetooth® radio channels might not be functioning well, perhaps because interference is impacting them, whereas other channels are working reliably. Over time, the list of reliable channels and unreliable channels may change, as other wireless communication devices in the environment come and go.

The primary device in a connection maintains a channel map which classifies each channel that is working well as used or otherwise as unused. The channel map is shared with the second device using a link layer procedure so that they each have the same information about which channels will be used and which will be avoided.

Devices use implementation-specific techniques to monitor how well each channel is functioning. If it is determined that one or more previously working channels are no longer working well enough, the channel map is updated. Conversely, if a previously bad channel is found to be working well now, its status will also be updated in the channel map. Channel map updates are then shared with the second device. In this way, Bluetooth ensures that it uses only known good channels, avoids problematic channels and keeps the channel map up to date so that it is always the optimal subset of channels that are being used. This is the adaptive aspect of the Bluetooth adaptive frequency hopping system.

Figure 10 – Adaptive Frequency Hopping distributing communication across channels

Figure 10 shows the way the Bluetooth channels were used by two connected devices during testing and illustrates the highly effective way in which radio use is spread across the ISM 2.4 GHz spectrum. At the bottom of the chart you can see the channel index and frequencies in MHz. 

To learn more about reliability in Bluetooth® connection-oriented and connectionless communication systems as well as how to achieve reliability in Bluetooth mesh networks, check out Woolley’s in-depth paper on Understanding Reliability in Bluetooth Technology.

FEATURED DOWNLOAD

Understanding Reliability in Bluetooth Technology

Download this detailed discussion on reliability in wireless data communication and the techniques Bluetooth technology uses to increase reliability.

INSTANT DOWNLOAD

Robust Indoor Distance Estimation Algorithms for Bluetooth® Channel Sounding

Bluetooth Channel Sounding is a powerful feature setting a clear and solid foundation for…

What’s New with Bluetooth® Technology: Channel Sounding, Upcoming Features, and Key Technology Trends

With over 5 billion devices shipping each year, Bluetooth technology is the most widely…

Bluetooth 6: What's New In The Latest Bluetooth Release?

Bluetooth technology is constantly growing, not only enhancing existing applications but also enabling entirely…

Bluetooth PAwR in a Large-Scale Test Network

In the ever-evolving, dynamic landscape of Bluetooth-connected smart devices, efficient interconnection and reliable communication…

Bluetooth Channel Sounding: How It Works and What It MeansBluetoothチャネルサウンディング:その仕組みと意義

Bluetooth® Channel Sounding is a new secure, fine-ranging capability that promises to enhance the…

Receiver Blocking Resilience Test Suite

This Test Suite tests the receiver blocking resilience of a Bluetooth implementation. It is…

Now Available: New Version of the Bluetooth Core SpecificationBluetoothコア仕様の新バージョンがリリース

Thanks to the dedication and hard work of the Bluetooth community, Bluetooth® technology is…

Channel Sounding: Technical Overview (Pt 2)

In Part 1 we introduced the new Bluetooth distance measurement innovation known as Channel…

Unlocking Healthcare Potential: SPP and Bluetooth® LE for Medical Devices

The Serial Port Profile (SPP) has long been a well-known standard for wireless serial…

The Bluetooth Roadmap: Bluetooth Specifications in ProgressBluetoothのロードマップ:策定中のBluetooth仕様

Though not commonly known among many consumers, Bluetooth® technology is constantly and consistently advancing to…

Bluetooth® Channel Sounding: A Technical Overview

This paper provides a detailed technical overview of Bluetooth® Channel Sounding, a secure fine ranging…

The Bluetooth® Mesh Primer

An introduction and explanation of important Bluetooth® Mesh concepts.

Enabling the Digital Transformation of Industrial IoT with Bluetooth®

The Industrial IoT is a digital transformation process for enterprises offering them compelling abilities…

Bluetooth® Technology for Linux Developers

Learn how to use the interprocess communication system D-Bus and the BlueZ APIs to create Bluetooth applications for Linux computers.

Designing and Developing Bluetooth® Internet Gateways

Learn about Bluetooth® internet gateways, how to make them secure and scalable, and design and implement your own...

The Bluetooth LE Security Study Guide

Learn about fundamental security concepts, the security features of Bluetooth Low Energy, and gain some hands-on experience using those features in device code.

 Get Help