For years, Bluetooth® technology enhanced the lives of millions of people around the world, becoming an integral part of how we stay connected. Its global proliferation has sparked a number of myths about what the technology can and can’t do. In truth, Bluetooth technology goes far beyond personal devices, powering a wide range of essential solutions, from asset tracking and indoor navigation to networked lighting control and industrial innovations. This article looks at a few of the most common myths about Bluetooth technology and the facts behind the fiction.

“Bluetooth’s growth has fueled many startups that we have worked with over the years, and we discover new uses for the long-range extensions in a lot of projects that we are evaluating.” 
– Jean-Samuel Chenard, PhD, Motsai Inc.

Myth: Bluetooth Is a Short-Range Technology

Due, in large part, to how the technology was first used, there is a widely held opinion that Bluetooth® technology is only good for short-range applications. Since the most well-known use cases, such as audio streaming and wearables, have design requirements that dictate a shorter range, these developers chose to implement the technology and hardware in a way that delivers a max range of 10 to 30 meters.

Fact: Bluetooth Signals Can Extend to More Than a Kilometer

The effective, reliable distance between Bluetooth® devices can be greater than a kilometer and can even support reliable remote control of beyond-visual-range (BVR) drones. Though several factors can influence the effective range of Bluetooth technology — from radio spectrum and transmit power to antenna gain and path loss — the variable range is proof of the technology’s versatility. Unlike other wireless technologies, the wide spectrum of achievable and reliable distances gives developers tremendous flexibility to create solutions that meet the precise needs of their target use case. Check out other factors — such as receiver sensitivity, antenna gain, and PHY — that play a role in determining how far Bluetooth range can go.


The Bluetooth Range Estimator

Calculate the expected range between two Bluetooth devices.


Myth: Interference Makes Bluetooth Connections Unreliable

One of the biggest challenges for any wireless technology in providing reliable data communication is interference. Unlike wired data communications technologies, wireless technologies must share the transmission medium and multiple devices may try to communicate over the same wireless spectrum, in the same general area, and at the exact same time. When this happens, in-air collisions between data packets occur which can make a packet unreadable by the receiving device and effectively lost. Packets being transmitted between two devices can be corrupted or lost if they collide with a packet being transmitted at the exact same time and frequency channel between other in-range devices.

Fact: Bluetooth Technology Is Designed to Overcome Potential Interferers

Bluetooth® technology has adopted several techniques to lower the probability of collisions and offset inevitable packet loss. Two ways Bluetooth technology overcomes potential interferers and enables reliable wireless data communication is by using adaptive frequency hopping and small, fast data packets.

The reliability of any wireless system is all about spectral efficiency: shorter packets equal fewer collisions. Bluetooth packets are typically half the size and four times faster. Having small, fast packets enables more efficient use of the spectrum and significantly lowers the probability of collisions.

Spread spectrum techniques can increase resiliency in busy radio environments where collisions and interference are more likely to occur. Adaptive frequency hopping is a unique spread spectrum technique that enables Bluetooth packets to adapt to avoid active, congested channels. Channels that are noisy and busy are marked and not used. The list of reliable channels and busy channels can change quickly as other wireless communication devices and noise in the environment come and go. Adaptive frequency hopping allows Bluetooth technology to dynamically track which channels are functioning best and find the most reliable path.

Learn more about how Bluetooth® technology supports reliable data communication.

“Bluetooth® is unique in the way it uses technologies like adaptive frequency hopping and MIC that enhance reliability without adversely affecting power consumption.” 
– Masuto Nishiura, Kozo Keikaku Engineering


Understanding Reliability in Bluetooth Technology

Download this detailed discussion on reliability in wireless data communication and the techniques Bluetooth technology uses to increase reliability.


Myth: Bluetooth Technology is Only Useful in Consumer Applications

There’s widespread misunderstanding about Bluetooth® technology’s commercial and industrial potential. In the last 20 years, Bluetooth technology created and cultivated hundreds of new global markets with audio streaming and short-range data transfer being two of the most prevalent. And while Bluetooth technology is well known for advancing the connective capabilities of audio headsets and fitness trackers, that is just a narrow aspect of its full potential.

Fact: Bluetooth Technology Supports Commercial and Industrial Spaces

All over the world, developers use Bluetooth® technology to achieve reliable wireless connections at long distances in challenging environments, and these connections are the foundation of a new generation of use cases like industrial asset tracking, large-scale sensor networks, and networked lighting control.

Recently, Energy Management Collaborative (EMC) partnered with Silvair and McWong International to deploy the largest Bluetooth Mesh lighting control installation in the world, installing 3,685 Bluetooth Mesh lighting controllers across 17 floors of a 470,000 square-foot office building. SmartShepherd partnered with Cassia Networks to enable real-time tracking monitoring of livestock with Cassia’s Bluetooth gateways and IoT access controller. And POM Tracer collaborated with Laird Connectivity to use Bluetooth technology to create an easy-to-implement product that allows businesses and organizations to safely return employees to their offices, mitigating the risk of future shutdowns due to COVID-19.

“Compact, fast, radio-efficient data packets make the foundation for Bluetooth® Mesh.” 
– Szymon Slupik, CTO and co-founder, Silvair

High Reliability and Long Range

Bluetooth® technology is capable of achieving highly reliable communication and significant range in even the most challenging circumstances. The range and reliability of Bluetooth technology is more than just the sum of its parts; the technology was designed with these factors in mind.

For a detailed discussion on the many mitigation techniques Bluetooth technology uses to increase reliability, download Understanding Reliability in Bluetooth Technology. And check out the Bluetooth range estimator to see how far Bluetooth range can go for you.


How Bluetooth® Technology Makes Wireless Communication Reliable

Learn about the challenge of wireless interference and the techniques Bluetooth technology uses to overcome it.


Coded PHYs + Advertising Coding Selection = Superior Bluetooth® Range

Bluetooth® v5.0 introduced LE Coded PHYs to extend the original range of the 1M…

5.7 km of Bluetooth® Range

40 km from Irvine, California gets you to beautiful Newport Beach Pier, and 5.7…

Unveiling the Truth: Debunking Bluetooth’s Biggest Myth

Bluetooth Low Energy was designed to considerably reduce power consumption and cost while maintaining…

2300 Meters of Bluetooth Connectivity - Not so Short Range

The number of Bluetooth® devices and applications is constantly increasing. Applications such as warehouse…

Using Bluetooth in Location Tracking Devices

Bluetooth ranging technology, which uses the distance between one or more devices through signal…

Bluetooth Development Training: Works With 2022

The role Bluetooth has played, and will continue to play, in the evolution of IoT…

Comparing The Different Wireless Technologies For Condition Monitoring Applications In IIoT

There are several wireless technologies to choose from, each with their advantages and disadvantages…

Shouting and Listening: Extending Bluetooth LE Range

Increasing the range of a wireless product is an advantage for virtually every application.…

Bluetooth Mesh for Commercial Lighting

It is not often in real life that technology (governed by the underlying laws…

Penn Waste Inc. Minimizes Machine Downtime And Improves Efficiency

Learn how Dodge Industrial partnered with Cassia Networks to help Penn Waste Inc. reduce…

10 Resources That Showcase the Range and Reliability of Bluetooth Technology

Despite the overwhelming adoption of Bluetooth® technology across a wide range of global solutions…

Bluetooth Range and Reliability: Myth vs Fact

For years, Bluetooth® technology enhanced the lives of millions of people around the world, becoming…

How Bluetooth Technology Enables Reliable, Long- Range Solutions

The success of Bluetooth® technology in the wireless communication industry is illustrated by its…

Understanding Reliability in Bluetooth® Technology

Download this detailed discussion of the issues and factors that impact the reliability of…

Bluetooth Mesh Networking Highlights and Features

This white paper provides an overview of the Bluetooth Mesh Profile and highlights some…

Advanced Bluetooth® Technology – Under the APIs

Bluetooth technology has changed enormously since its initial release about twenty years ago. Communication…

Low Latency, Deterministic Bluetooth Technology

Watch Pelle Svenson of ublox provide an overview of low latency deterministic control using…

Disrupting the Restoration Industry with Bluetooth

When Steven Kramer became aware of how antiquated water restoration operations had become in…

Long Range High-Quality Bluetooth Audio at L'Oreal Office

L’Oreal was looking for a new solution and wanted to test wireless Bluetooth headsets…

 Get Help