Bluetooth LE Audio is the next generation of Bluetooth® audio and operates on the Bluetooth Low Energy (LE) radio, compared with Classic Audio, which operates on the Bluetooth Classic radio, also known as the Bluetooth BR/EDR radio. LE Isochronous Channels are one of the key features introduced in Bluetooth Core Specification 5.2. LE Isochronous Channels, along with Bluetooth profiles that are currently in development, will help enable Multi-Stream Audio and Broadcast Audio for Auracast™ broadcast audio. The aim of this article is to give developers a fundamental introduction to this use case and to answer some common questions.

Multi-Stream Audio is one of the major new features for LE Audio. It enables the transmission of multiple, independent, synchronized audio streams between an audio source device, such as a smartphone, and one or more audio sink devices like earbuds or earphones. To support Multi-Stream Audio, Connected Isochronous Group (CIG) and Connected Isochronous Stream (CIS) were introduced. A CIG is created by the central and it can include one or more CISs. A CIS is a point-to-point, data transportation stream between a central and a certain peripheral, and is a bidirectional communication protocol with acknowledgment. Furthermore, a CIS can be divided into at least one or more subevents, and these subevents are the timing slot for central and peripheral to exchange data packets using specific Connected Isochronous PDU.

Figure 1 shows a CIG, which includes 2 CISs. Each CIS includes 4 subevents.

 

Auracast™ broadcast audio is an important capability of Bluetooth LE Audio. It enables an audio source device to broadcast one or more audio streams to an unlimited number of audio sink devices. To support Auracast™ broadcast audio, Broadcast Isochronous Group (BIG) and Broadcast Isochronous Stream (BIS) are introduced. There are two types of devices: Isochronous Broadcaster and Synchronized Receiver. A BIG is created by an Isochronous Broadcaster and it can include one or more BISs. A BIS is a one-to-many data transportation stream. It uses the broadcast packet transportation mechanism without acknowledgment. Furthermore, a BIS can also be divided into one or more subevents. These subevents are the slots for broadcasting specific Broadcast Isochronous PDU which can be received and processed by unlimited Synchronized Receivers.

Figure 2 shows a BIG, which includes 2 BISs. Each BIS includes 4 subevents.

 

Common questions developers have on LE Isochronous Channels include:

How many CISs can a CIG create?

The maximum number of CISs in a CIG shall be 31.

What’s the process the central uses to create a CIS with a peripheral?

Please refer to Bluetooth® Core Spec 5.2, Vol 6, Part B, Section 5.1.15, “Connected Isochronous Stream Creation procedure”.

For a single peripheral, how many CISs can a central create with it?

The central can create one or multiple CISs with a single peripheral. The maximum number of CISs in a CIG shall be 31.

Can CIS be encrypted?

Yes, it can be encrypted, please refer to Bluetooth Core Specification v5.2, Vol 6, Part B, Section 4.5.13.7.

How do the central and peripheral detect a CIS lost?

When establishing a CIS, the central shall start a CIS supervision timer to monitor for the loss. If the CIS supervision timer reaches 6 * ISO_Interval before the CIS is established, the CIS shall be considered lost. The peripheral also starts the CIS supervision timer. If it reaches 6 * ISO_Interval before the CIS is established, the CIS shall be considered lost in the peripheral side.

If the CIS has been established, when the supervision timer reaches the connSupervisionTimeout value, the CIS shall be considered lost. Please refer to Bluetooth Core Spec v5.2, Vol 6, Part B, Section 4.5.2.

How does a Synchronized Receiver detect lost with an Isochronous Broadcaster?

A device that has synchronized to a BIG is called a Synchronized Receiver. When this device starts to synchronize the BIG, a BIG synchronization timeout parameter shall be configured, which specifies the maximum permitted time between successful receptions of BIS PDUs. The timeout is at least 6 * ISO_Interval.

How many BISs can be created in a BIG?

The maximum number of BISs in a BIG shall be 31.

Can BIS be encrypted?

Yes. Please refer to Bluetooth Core Specification v5.2, Vol 6, Part B, Section 4.4.6.10.

Can Constant Tone Extension (CTE) be appended after the Cyclic Redundancy Check (CRC) of LE Isochronous Channels packets?

For Isochronous Channels, it has its own Isochronous Physical Channel PDU and it doesn’t include a CTE field. For additional details, please refer to Bluetooth Core Specification v5.2, Vol 6, Part B, Section 2.6. From the LE Link Layer level, it is still allowed to use Advertising Physical Channel PDU or Data Physical Channel PDU for CTE.

Besides LE 1M PHY, can Isochronous Channels support LE 2M PHY and LE Coded PHY?

Yes, CIS allows that the PHY used from central to peripheral is different than the PHY used from peripheral to central.

 

Download the Bluetooth® Core Specification Version 5.2 Feature Overview [PDF] to learn more.

FEATURED DOWNLOAD

Bluetooth Core Specification Version 5.2 Feature Overview

INSTANT DOWNLOAD

Now Available: Auracast™ Developer Best Practice Guides

When Bluetooth® LE Audio was released, it introduced broadcast audio to Bluetooth technology. This…

Automated Emergency Light Testing Through Bluetooth Mesh

During a summer internship at Nordic, I took on a project that focused on…

Coded PHYs + Advertising Coding Selection = Superior Bluetooth® Range

Bluetooth® v5.0 introduced LE Coded PHYs to extend the original range of the 1M…

Channel Sounding: Technical Overview (Pt 1)

Channel Sounding is an innovative new feature coming to Bluetooth technology, enabling distance estimation…

Bluetooth Low Energy Fundamentals

The Bluetooth Low Energy (LE) Fundamentals Course is designed to give you the knowledge…

How to Build an Auracast Assistant

This document covers the basic design principles for building an Auracast™ assistant, explaining the…

How to Build an Auracast Transmitter

This document covers the basic design principles for building an Auracast™ transmitter, explaining the…

Bluetooth Developer Journey

As a leading player in the semiconductor industry committed to the development of cutting-edge…

Generic Health Sensor Design and Implementation Guide

The Generic Health Sensor (GHS) Design and Implementation Guide guides implementers of health sensor…

The Latest in HADM with Bluetooth LE

HADM, or high accuracy distance measurement using Bluetooth does exactly what it says –…

Mr. Beacon Podcast: Snapdragon Sound with Mike Canevaro

This episode of the Mr. Beacon Podcast explores the revolutionary world of Bluetooth audio.…

The Bluetooth® Low Energy Primer

Are you new to Bluetooth Low Energy? Learn about its constituent parts, features, and how it works.

Bluetooth® Technology for Linux Developers

Learn how to use the interprocess communication system D-Bus and the BlueZ APIs to create Bluetooth applications for Linux computers.

Designing and Developing Bluetooth® Internet Gateways

Learn about Bluetooth® internet gateways, how to make them secure and scalable, and design and implement your own...

 Get Help