Bluetooth® Mesh is the first low-energy communication standard to provide a reliable, fast, and scalable wireless lighting control system. Silvair has successfully tested the new technology at its headquarters in Krakow and implemented it for a customer in Dallas. At Silvair’s headquarters, the conventional lighting system was converted to a wireless lighting control network throughout the office.

Advanced lighting control concepts improve office lighting efficiency and reduce energy costs. Presence detection via sensors and the use of daylight are among the most effective methods. In addition to wireless lighting control, Silvair implemented these two strategies in its offices and installed sensors that measure room occupancy and ambient light.

Data Traffic Based on Information Instead of Devices

Bluetooth® Mesh networks enable many-to-many communication between many devices and are ideal for creating IoT solutions that require several thousand devices to communicate reliably and securely with each other. It brings the proven, worldwide interoperability and the mature, trustworthy overall system of Bluetooth technology to the creation of industry-compatible device networks.

The communication principles introduced in this way correspond to the approach of Information-Centric Networking (ICN). This concept was developed to cope with the increasing data traffic by name-based addressing and forwarding concepts as core principles. Instead of sender and recipient, information based on names takes center stage and makes data independent of location, storage, or application. Bluetooth Mesh lighting networks are based on the publish-subscribe principle. Here, addresses are assigned information, not specific devices. The luminaires subscribe to messages from certain addresses so that they can react to relevant messages. Other devices publish to these addresses and distribute lighting control commands simultaneously to all affected recipients.

Simultaneous multicasting spreads messages with a single transmission to many nodes and is an essential prerequisite for lighting applications. In commercial environments, dozens or more network nodes must simultaneously respond to lighting control commands with full synchronization and minimal latency. Bluetooth Mesh networking is the only solution where multiple multicast messages can be sent simultaneously over the network. This makes Bluetooth® Mesh lighting systems robust.

FEATURED INFOGRAPHIC

Lighting as a Platform

See how connected lighting systems are being used as a platform to enable advanced building services like wayfinding, asset tracking, and space utilization to improve the ROI of smart building investments.

SEE THE INFOGRAPHIC

Reliability and Performance Through Simultaneous Multicasting

Through simultaneous multicasting, wireless installations achieve the trouble-free performance and scalability of wired systems. Even difficult radio conditions can be compensated, as practical examples show.

A significantly reduced data volume sets Bluetooth Mesh networking apart from other wireless systems. With centralized radio-based networks, the data always runs via a central control device. This not only makes it a single point of failure, but also creates bottlenecks. This is because the sensors send information to the central control hardware, which in turn sends commands to each of the associated devices. This multiplies the volume of data traffic and is a real problem, especially for lighting applications where an immediate response is required.

Bluetooth® Mesh networking shifts the control functions to the individual devices. This reduces the volume of data traffic by half and enables a decentralized architecture without bottlenecks or single points of failure. Bluetooth Mesh networks do not require any central control devices, as a software controller is built into each luminaire. They also do not require gateways, as Bluetooth is already integrated in every personal computing device. This allows a smartphone to connect directly to any node when commissioning or configuration tasks are performed.

Compared to other mesh systems, Bluetooth Mesh networks use smaller data packets. They are very compact because the protocol is designed to transport large quantities of small packets as quickly as possible. More compact data packets generate fewer packet collisions, which is crucial for reliable and scalable communication.

Practical Experience with Silvair and Its Customers

Silvair, a pioneer in intelligent lighting solutions based on Bluetooth® technology, has expanded the LED system installed at its Polish headquarters into a sensor-controlled adaptive network based on this technology. Due to frequent radio interference, such an office does not appear to be particularly suitable for radio communication. In addition to all smartphones and laptops, many test devices ensure extremely high data traffic. But even under these circumstances, wireless lighting control based on Bluetooth works reliably and synchronously throughout the office.

The existing luminaires with 230V LED drivers from BOKE were retained. A mesh bridge was installed in each luminaire and a presence and ambient light sensor from Osram was installed directly next to it in the ceiling panels. The mesh bridge is a Silvair reference design. It is a device controller that converts Bluetooth Mesh commands to a standard 0-10V output, transforming an existing lighting system into a Bluetooth  Mesh system.

The sensor-based lighting control automatically and smoothly adjusts the brightness of the luminaires to the occupancy and availability of daylight. In each room, there is a wireless switch with which the scenario can be controlled as required. All luminaires in the building can also be switched off immediately via a main switch.

In addition to modern control functions, Bluetooth Mesh networks enable further services based on the lighting infrastructure. Silvair Monitoring is a package of software tools that provides valuable insights into room usage, for example. Together with the Japanese technology company Murata, the company has implemented a wireless control system in the Billingsley Company office building in Dallas, Texas. The rooms were divided into different zones for daylight use, and detailed data was collected on the presence of people and the energy consumption of individual rooms. In rooms with windows, ambient light sensors communicate with the mesh-based luminaires so that daylight is used and a constant brightness level is ensured throughout the day. All rooms are also equipped with presence detectors. This helps to reduce costs and optimise the working environment for employees. The occupancy data can be displayed in heating cards. The company thus not only saves energy but also optimises space utilisation.

Silvair’s lighting control technology has recently been adopted in more practical implementations in a variety of environments. In addition to the projects mentioned above, the company’s solutions were implemented in a school in Jaworzno, Poland, and in a 25,000 square metre warehouse of luminaire manufacturer McWong in Sacramento. Silvair is convinced that the Bluetooth Mesh standard — due to its open nature and enormous technological potential — will democratise lighting control. The technical and economic requirements for the implementation of efficient sensor-controlled control strategies can be significantly reduced with it. Whether this will be the case has not yet been determined, but these initial implementations do indeed look very promising.

To learn more about Bluetooth® Mesh, download Bluetooth Mesh Networking: An Introduction for Developers.

FEATURED DOWNLOAD

Bluetooth Mesh Networking: An Introduction for Developers

Download this in-depth introduction to find out how the adoption of mesh networking positions Bluetooth technology to be the dominant low-power wireless communications technology in a wide variety of new sectors and use cases, including Smart Buildings and the Industrial IoT.

INSTANT DOWNLOAD

Automated Emergency Light Testing Through Bluetooth Mesh

During a summer internship at Nordic, I took on a project that focused on…

2024 Bluetooth® Market Update: Expanded Capabilities for Greater Possibilities

Arguably the foundation of all modern technology, Bluetooth® has reinvented how we interact with…

Elevating Network Excellence: The Impact of New Bluetooth® Mesh Standard

In September 2023, the Bluetooth SIG announced Bluetooth® Mesh feature enhancements, a significant milestone…

Periodic Advertising with Responses (PAwR): Bidirectional Bluetooth Advertising Is Now Possible

If you’ve wondered whether advertising in Bluetooth Low Energy can be bidirectional, then this…

Recently Released: New Trends for Bluetooth Device Networks新たに公開:Bluetoothデバイスネットワークの新トレンド

Though more commonly associated with audio streaming and wearable devices, Bluetooth® technology also plays…

2024 Bluetooth® Market Update

The 2024 Bluetooth® Market Update examines the direction and adoption of Bluetooth technology.

How Bluetooth® NLC Standardizes Control for Smart Lighting

Discover how Bluetooth® NLC is paving a new path for lighting control and making…

Periodic Advertising with Responses (PAwR): Bidirectional Bluetooth Advertising Is Now Possible

If you’ve wondered whether advertising in Bluetooth Low Energy can be bidirectional, then this…

Silicon Labs Offerings for the Newest Bluetooth Mesh 1.1 Update

Bluetooth Mesh’s ability to support the Internet of Things and connectivity among various devices…

Silicon Labs Provides an In-Depth Look at Bluetooth Trends We Can Expect to See in 2024

A global provider of secure, intelligent wireless technology for a more connected world, Silicon…

Walkthrough Bluetooth Mesh 1.1 and Bluetooth® Networked Lighting Control (NLC)

If you are interested in the new features introduced in the Bluetooth® Mesh or…

Six Bluetooth Mesh Feature Enhancements to Get Excited About

The new Bluetooth mesh feature enhancements offer more robust security, improved network efficiency, reduced…

Bluetooth® Mesh Feature Enhancements Summary

This paper summarizes the recent Bluetooth® Mesh feature enhancements and provides references to other…

Bluetooth® Mesh Subnet Bridging - Technical Overview

This paper examines subnet bridging, a new feature introduced in the Bluetooth® Mesh protocol…

ABI Snapshot - 2023 Bluetooth® Market Update

The Bluetooth® Market Update, released annually by the Bluetooth Special Interest Group (SIG), highlights…

2023 Bluetooth® Market Update

Featuring new market insights and industry forecasts from ABI Research and other analyst firms...

Bringing Wireless Controls To The Epicentre Of Connectivity

This year, the time came for the lighting infrastructure at the Bluetooth SIG headquarters…

Smart Lighting And Controls Halve Energy Consumption At Campus Pitzemburg

Campus Pitzemburg has cut its energy usage by 50% thanks to smart controlled energy…

Sylvania Lets Efficiency And Control Fly High At FLYINGGROUP Antwerp

FLYINGGROUP Antwerp was looking for a solution for their meeting rooms that were more…

2022 Bluetooth® Market Update

Featuring new market insights and industry forecasts from ABI Research and other analyst firms...

Designing and Developing Bluetooth® Internet Gateways

Learn about Bluetooth® internet gateways, how to make them secure and scalable, and design and implement your own...

How to Make Wearables Bluetooth Mesh Provisioners

Learn how to create applications for smartwatches and other platforms that can monitor and control nodes in a Bluetooth mesh network.

Lighting as a Platform

See how connected lighting systems are being used as a platform to enable advanced building services like wayfinding, asset tracking, and space utilization to improve the ROI of smart building investments.

An Introduction to the Bluetooth Mesh Proxy Function

Learn how to create applications for smartphones and other platforms which can monitor and control nodes in a Bluetooth mesh network.

Build a Smarter Building with Blue

See how Bluetooth increases reliability, reduces costs, and enhances your smart building ROI.

Overview – Bluetooth Mesh Networking

A quick overview outlining how Bluetooth mesh uniquely meets the reliability, scalability, and security requirements of commerical and industrial markets.

NOTICE: The Bluetooth SIG updated its Privacy Policy on 6 June 2024Learn more
 Get Help