Find members that manufacture, sell or design equipment for Bluetooth testing.


The Systems House business unit of 7Layers specializes in Te​st Solutions and Laboratory Management Systems focusing on the highest levels of automation and execution speed. Our RF conformance tester “InterLab Test Solution Bluetooth RF” is used in many BQTFs / BRTFs worldwide and covers all Bluetooth RF qualification test requirements.

Contact Magdy Ahmed


Anritsu actively develops the standards for radio layer testing within the Bluetooth SIG. Anritsu offers instruments for radio layer testing on basic rate, enhanced data rate and low energy radios. The product range also includes measuring of audio performance in Bluetooth enabled products implementing the headset, hands-free and A2DP profiles.

Contact Edward Harrison


Ellisys is a test and measurement company committed to the design and timely introduction of advanced Bluetooth, USB, and Wi-Fi test and analysis solutions. Ellisys Bluetooth protocol analyzer systems and link layer qualification tools (EBQ) are built to address the rapid evolution of Bluetooth technology and related development complexities with unparalleled innovations. Ellisys protocol analyzers, including Vanguard, Explorer, and Tracker, are all-in-one, fully integrated systems that support wideband (all channels) capture and analysis of Bluetooth Classic (BR/EDR), Bluetooth Low Energy (LE), plus concurrent Wi-Fi, WPAN/IEEE 802.15.4 (Vanguard), raw spectrum capture, host controller interface (HCI) protocols (USB, UART, and SPI), Audio I2S, WCI-2, and generic protocols including UART, SPI, I2C and SWD, all visualized over the widely adopted Ellisys software suite..

Contact Mario Pasquali

Teledyne LeCroy

Teledyne LeCroy is a test and measurement solution company providing test tools, test services and consultancy across multiple wired and wireless technologies. Teledyne LeCroy’s Frontline family is the market leader in Bluetooth protocol analysis test tools and packet sniffers, as well as analysis and emulation tools for a wide range of additional technologies.  Frontline Sodera Bluetooth protocol analyzers are available in a number of licensable configurations covering, Bluetooth Classic (BR/EDR) and Bluetooth Low Energy (LE), Host Controller Interface (HCI), Wi-Fi (when used with 802.11 analyzer), USB, UART and raw spectrum data.  Teledyne LeCroy’s Harmony test platform is a Bluetooth LE conformance tester validated by the Bluetooth SIG for Link Layer (LL) and Host Controller Interface (HCI) and is used by Bluetooth Qualification Test Facilities (BQTFs) globally for qualification testing.

In addition to the Protocol analysis and conformance test tools Teledyne also provides an RF PHY Layer tester (TLF3000). The TLF3000 is available in a number of licensable configurations covering technologies (BR/EDR, LE and 802.15.4) and functionality (Developer and Production). The Developer license is a fully featured solution for lab use and the Production license is focused on high-speed remote testing in Production line environment.

Teledyne LeCroy has a dedicated Test Services team that provides consultancy and interoperability test services to wireless product manufacturers across the complete product life-cycle.

Contact Paul Russell

Agilent Technologies

(Agilent’s Electronic Measurement Group is becoming
Keysight Technologies)

Agilent Technologies offers an extensive portfolio of Bluetooth® technology test instruments, software and systems that provide the right solution for every phase of your Bluetooth communication product development. Whether you’re engaged in Bluetooth R&D, preparing for Bluetooth technology product qualification, or setting up and running a Bluetooth technology product manufacturing line, we can help you build a test solution to meet your specific Bluetooth technology needs. Accelerate Wireless Design and Test with Flexible, High-Performance Platforms.

Contact Mingyan Wang

Audio Precision

Audio Precision offers Bluetooth® audio measurement via APx Series audio analyzers and an optional Bluetooth module. All Bluetooth controls are integrated into the APx audio measurement software for fast, one-click measurements. No other analyzer combines integrated Bluetooth controls with APx’s best in class speed, ease-of-use and performance.

Contact Eric Hodges

Hyper Taiwan Technology

Hyper Taiwan Technology is delighted to offer Bluetooth testing and certification services as part of the lab’s comprehensive wireless test capabilities includes RF, RF-PHY and Profile testing. Our senior and professional BQEs who have qualified thousands of designs and products can offer a complete, cost competitive consultancy around the entire Bluetooth qualification process. Hyper China, duplicated the success of Hyper Taiwan, a recognized BQTF and located at Shenzhen to cover greater China and worldwide clients. The BRITS test systems from Hyper Taiwan Technology were validated by the Bluetooth SIG as a RF and RF-PHY platform to support the latest RF/RF-PHY test specification and qualification process.

Contact Eric Wang

National Instruments

National Instruments delivers fast, flexible, and accurate RF hardware powered by NI LabVIEW software to meet the ever-changing demands of the wireless industry and see the engineering process through from design to validation to production. NI address a wide range of test needs including Bluetooth, WLAN, GPS, and cellular technologies like LTE and GSM.

Contact Abitzen Xavier


Nextgen produce a range of solutions for automated interoperability testing via its Nextgen ATAM automation platform. The Nextgen ATAM test automation platform enables fully automated interoperability testing for consumer technology devices. ATAM is used for Bluetooth interoperability testing in a range of markets and applications, including Apple and Android Mobile devices, Automotive systems, wireless audio, silicon platforms, IoT devices and smart devices, smart speakers, lighting and more.  As well as supporting automation of traditional interoperability testing, ATAM automation also creates new categories of automated tests, including high volume repetition testing and stress testing and building a consumer aging profile which models real world usage over months. All in a fraction of the time taken by manual testing. ATAM tests as an end user, using standard product interfaces, and supports integration with Bluetooth analysers to provide the deepest levels of insight into product performance.

Contact Andor Miles Board

Perytons Ltd.

Perytons Ltd. offers protocol analyzers for Bluetooth Low Energy. The Peryton-Smart provide detailed analysis of the BLE protocol layers through several views, features and add-ons; suitable for novice and professional users. Peryton-Smart use standard off-the shelf available dongles to capture BLE sessions (all provided from Perytons), at an affordable price..

Contact Rubi Elbirt

Rohde & Schwarz

Rohde & Schwarz has been a member of the Bluetooth SIG since 1998. Based on this long experience, the company offers a large range of RF test instruments for testing basic rate, enhanced data rate and low energy Bluetooth devices in development and manufacturing.

Contact Ute Philipp


RTX’s Bluetooth low energy RF tester, the RTX2254, is specifically designed for manufacturing test of BLE devices. The measurement capabilities cover typical key parameters, and provides a versatile and very cost-efficient solution for monitoring product quality and performance throughout the manufacturing process.

Contact Per Oestergaard Nielsen

 Get Help