Many of you may know that radio spectrum is a valuable commodity and that globally there are clear rules (and often licenses that cost money) in order to use particular frequencies and bands. The radio frequencies in each country are “owned” by that country, and each country has the ability to permit or license specific use in certain frequencies. Fortunately, some bands are allocated in the same way with similar rules across many countries – these are called harmonized bands.

Bluetooth® operates in a harmonized frequency band that is one of the ISM bands (ISM=Industrial, Scientific and Medical) along with other technologies that also use the band (for example Wi-Fi or microwave ovens). Products are allowed to operate without a license using the ISM bands, but must adhere to a set of rules that help everyone benefit from the value provided by the spectrum. These rules define such things as maximum transmit power levels and how much spill over there can be in adjacent frequency bands. This means technologies like Bluetooth have what are called “guard bands”—free spectrum at the ends of a frequency band—in order to ensure there are no transmissions that spill over into the next band.

In the US, the FCC allocated the frequency band “above” the ISM band Bluetooth uses to a company called Globalstar specifically for the operation of a satellite communications service. As I understand it, Globalstar has not been as successful as they hoped in operating that service and have been exploring other ways to use the spectrum (although it was allocated for a specific use).

Globalstar proposed a new service called TLPS (terrestrial low power service) which would use a portion of their allocated band and a portion of the ISM band spectrum. In order to do this they have been asking the FCC to allow them to use this “satellite spectrum” for a terrestrial service AND for a change in the rules for the ISM band (just for them) so that only they can use a portion of it in an overlapping/spill-over way.

This seems wrong on many levels. Why should the FCC allow one company to use the ISM band with preferential rules only applying to them? If they could not operate a successful satellite service then they have little track record to show they would be successful at operating a different commercial service. Shouldn’t the FCC take the frequency back and allocate it to someone who could operate the service successfully?

In addition, the Bluetooth SIG (and others) has maintained this kind of overlapping use would cause interference and a detrimental impact on the other users of the ISM band, particularly the users of the hundreds of millions of Bluetooth devices sold in the US.

Recently, the FCC requested the Bluetooth SIG and other interested groups attend a technical demonstration session with Globalstar at the FCC Technology Center and attempt to highlight, in some way, if the interference concerns were valid. From what we saw, they are.

The demonstration sessions were held in a rather small space that meant we could not conduct some of the demonstration scenarios we had prepared. Nevertheless, our demonstrations with Bluetooth Hearing Aids and Bluetooth Smart Lighting both showed a clear impact from TLPS. The Bluetooth Hearing Aids showed packet loss increasing from a “correctable level” around 10% to nearly double at 20%—for end users this could mean broken up, or significantly lower audio quality. The Bluetooth® Smart Lighting demonstration used multiple Bluetooth lights spread around the room and when TLPS was present clearly showed a fourfold increase in the number of times certain lights did not receive a command to turn on or off or change color. Two clear demonstrations of the interference caused by TLPS.

Due to these results, we were beyond surprised this week to see claims by Globalstar that TLPS caused no interference with Bluetooth—especially when they were present for our demonstrations and saw the results. There is clear interference with products and services in the ISM band from the proposed TLPS service.

The Bluetooth SIG has cooperated with the FCC throughout this lengthy process. You can see our filings with the FCC here, including our recent filing summarizing our findings from the demonstrations. We believe we have now shown there is a concerning level of interference caused by this overlapping TLPS service.

Moreover, I believe that it is wrong and a dangerous precedent to allow one company to have different rules for using the ISM band. For the sake of the most beneficial use of the ISM band in general and the millions of U.S. Bluetooth users in particular, I do hope the FCC denies the Globalstar TLPS proposal.

Is Globalstar Telling the Whole Story?

Read the FCC Filings

How Auracast™ Broadcast Audio Will Shape the Landscape of Hearing Aids and Assistive Listening Devices

Well known for leveraging their intelligent hearing, audio, video, and gaming solutions to bring…

Industrial IoT: What, Why, and Why Bluetooth Technology

If you are a Bluetooth® developer, marketer, or aficionado who’s new to the Industrial…

Silicon Labs Channel Sounding: Bluetooth Distance Measurement for IoT and Automotive Applications

At Embedded World North America, Electropages stopped by the Silicon Labs booth to speak…

Bluetooth 6: What's New In The Latest Bluetooth Release?

Bluetooth technology is constantly growing, not only enhancing existing applications but also enabling entirely…

Taking Find My Applications to the Next Level with Telink

Discover how Telink’s solutions enhance Find My applications with cross-platform compatibility and Bluetooth Channel…

Bluetooth Channel Sounding Release and Lambda:4 Demo at Bluetooth SIG Event in Bellevue September 2024

To celebrate the release of the Bluetooth Core Specification 6.0 including the Channel Sounding…

The Auracast™ PA System That Fits in Your Pocket

Watch how Auracast™ broadcast audio enables a simple clip-on microphone to provide a high-quality…

Growing the Auracast™ Ecosystem

Discover a small sampling of the expanding Auracast™ product ecosystem, showcasing an array of…

More Than One Way to Unmute Silent TVs

From native integration to retrofit solutions, explore the ways silent public TVs in noisy…

How Bluetooth Technology Can Be Used to Optimize Retail Operations

For more than 35 years, Qualcomm Technologies, Inc. has connected products and technologies you…

Bluetooth Channel Sounding Brings Crucial Ranging to New Bluetooth Devices

The Bluetooth SIG has relentlessly pushed forward the capabilities and feature sets of the…

Receiver Blocking Resilience Test Suite

This Test Suite tests the receiver blocking resilience of a Bluetooth implementation. It is…

The Perfect Fit for an Auracast™ Retrofit

Learn about Auracast™ broadcast audio retrofit solutions and opportunities.

Bluetooth® Core Specification v6.0 Feature Overview

Bluetooth® Core Specification version 6.0 includes several feature enhancements. This paper provides an overview…

Bluetooth® Channel Sounding Communications Guide

This communications guide includes Bluetooth® Channel Sounding key messages and positioning details. This document…

2024 Bluetooth® Market Update

The 2024 Bluetooth® Market Update examines the direction and adoption of Bluetooth technology.

Auracast Broadcast Audio Retrofit Solutions and Opportunities

This report by ABI Research delves into the opportunity for public spaces to offer…

Revolutionizing Online Order Fulfillment: Managing Mis Shipments

Discover how Wiliot, an ambient Internet of Things (IoT) pioneer, is revolutionizing the online…

What's the Range of Auracast Broadcast Audio?

Get the answer to the question everyone’s asking. Find out what the coverage area…

Can You Add Auracast Support to Existing Devices?

Are you waiting for native Auracast™ support? You might not have to. Find out…

Retail Pharmacy

A leading retailer is collaborating with Wiliot, an ambient Internet of Things (IoT) pioneer,…

Introducing Bluetooth® LE Audio

Now available for free digital download, get your copy of this in-depth, technical overview of the LE Audio specifications.

Bluetooth® Technology for Linux Developers

Learn how to use the interprocess communication system D-Bus and the BlueZ APIs to create Bluetooth applications for Linux computers.

Designing and Developing Bluetooth® Internet Gateways

Learn about Bluetooth® internet gateways, how to make them secure and scalable, and design and implement your own...

The Bluetooth LE Security Study Guide

Learn about fundamental security concepts, the security features of Bluetooth Low Energy, and gain some hands-on experience using those features in device code.

NOTICE: The Bluetooth SIG updated its Terms of Use on 29 October 2024Learn more
 Get Help